A fourth round of economic dialogue under the framework ofus-China strategic and economic dialogue concluded in Beijing. They announcedthat it would take further practical measures to enhance macroeconomiccooperation, promote open trade and investment, and strengthen internationalrules and global economic governance, promoting the stability of the financialmarkets and reform.,Cooperation, strengthening macroeconomic

Us remains committed to the transformation of economic growthmode, increased levels of investment and exports, in the medium-term willalways increase in the savings rate over the last 30 years (1980-2010) average.In accordance with President Obama's 2013 fiscal year budget United Statescommitment to deficit reduction of at least $ 5 trillion in the next 10 years.

China is committed to changing the mode of economic development,actively expand domestic demand, and would expand consumer as an importantstrategy to expand domestic demand. To promote these goals, China will step upefforts to structural tax cuts, efforts by the end of 2012 to reduce someimport tariffs is closely linked with the lives of the people.

China remains committed to promoting the reform of exchange rates,enhanced two-way floating RMB exchange rate flexibility, greater play thefundamental role in the formation of market supply and demand in the currency.The United States issued a statement welcoming the Chinese side to expand Yuantrading band against the dollar.

Second, promote open trade and investment

Both sides pledged restraint in using trade remedy measures forrelief for purposes other than those for trade, including the realization ofthe objectives of industrial policy. Both parties undertake to respect theruling of the dispute settlement mechanism of the World Trade Organization. Ina fair, objective and transparent manner on both sides properly deal withanti-dumping and countervailing investigations.

Both sides will further strengthen the fight against violations ofintellectual property law enforcement capacity-building and increasedresources, China will improve IP-related laws and regulations, research onmeasures to further strengthen accountability for the criminal liability ofinfringement of intellectual property rights.

US commitments in the export control system in the reform process,fully taking into account requirements of fair treatment made. Us committed toefforts to promote civilian high-tech exports to China civilian end users andcivilian end use.

Third, international rules and global economic governance

HC plastic mesh News: afterhaving experienced a strong rebound in 2010, North American polyethylene (PE)will resume moderate growth in demand in the market norm. IHSCMAI according tothe latest statistical data published, PE needs of about 21 million tonnes inNorth America in 2010, the next 5 years is expected to be growing at an averageannual rate of approximately 1.3% mild, by 2016, demand will reach about 24million tons. Meanwhile, petrochemical business in North America in the nextfew years will remain low-cost gas feedstock advantage PE device operating rateshould be in 80%~90%, this means that the producers will still have pricinginitiative.

Canada Nova chemicals Corporation CEO Landi·woerfu in early October,"said PE so far this year in North America sales rose by about 2%.Well-run PE industry in North America currently, device operating rate of about90%. "The United States Dow Chemical Company features plastic headhuohuade·angelaide said:" the current PE better-than-expected demandin North America. While the Economic Outlook worries, but people still need tobuy non-durable goods, such as food packaging, this is a huge market for PE.2012 global GDP growth is estimated to be 3%, even slowing to around 2%, PEdemand growth is still exceeding supply growth. ”

Angelaide also pointed out that, since the PE market supply anddemand fundamentals continue to tighten, and most new cracking capacityworldwide is the high cost of naphtha cracking capacity, so the profitabilityof producers in North America will be further improved. Almost all majorpetrochemical producers in North America over the next 5 years will be ethyleneand PE for capacity expansion. According to CMAI said, according to the currentdata show that if all announced capacity expansion projects can be implementedas scheduled, then North America by 2016 will add 1.5 million tons/year of PEcapacity.

Nova chemicals in recent months some transactions have beenundertaken to enhance the competitiveness of its PE business, includingcompanies located in Sarnia, Ontario and Alberta Joffre ethylene petrochemicalcomplex to increase supply. William Wolf, said: "additional supply of rawmaterials will guarantee that our PE production by 2013, Joffre petrochemicaljoint PE capacity will be fully utilized in the body, company or consideredCanada West for pyrolysis expansion. "In Canada East, Nova chemicals hassigned a number of ethylene supply agreement to leverage from the Cyrus shaleregion of ethylene raw materials as its Sarnia petrochemical joint inside thepreferred raw material for 840,000 tons/year ethylene cracker. Nova chemicalsis currently being planned to reform the cracker, to adapt to the high proportionof ethylene raw materials. Nova in Joffre and Sarnia chemical recentlyannounced that it would create a new PE units, is expected to be completedbetween 2014-2017.

Equipment industry technological progressand technological innovation investment direction (2010)

1, the energy-saving plastic rubberinjection molding machine clamping force 800 ~ 4000t, injection volume 3000 ~55000g, energy consumption ≤ 0.35kWh/kg products

2, the high-speed energy-saving plasticextruder production of various types of pipes, plates, atypia, Screw diameter45-150mm, production capacity 30-200kg / h power consumption ≤ 0.35kWh/kg

3, large efficient two plate injectionmolding machine clamping force of 2500 ~ 5000t, 15000 ~ 80000g, energyconsumption of the injection volume ≤ 0.4 kWh / kg products

4, all-electric plastic injection molding machineclamping force of 30 ~ 200t injection volume 15 ~ 300g, power consumption ≤ 0.3kWh/kg products

5, microcellular foamed plastic injectionmolding machine clamping force of 60 ~~ 250t injection volume 30 ~ 650g, powerconsumption ≤ 0.4kWh/kgproducts

6 large twin-screw extrusion granulationunit production capacity of 300,000 to 450,000 tons / year

7 large production capacity of aramidreaction extruder (extrusion) ≥ 1.4 tons / year

Unit production capacity of carbon fiberpre-dipped 0.6 × 106 ~ 6 × 106 m / width ≥ 1.2 m

November 26, 2009, the NationalStandardization Management Committee appointed GB integrated document [2009]No. 93, issued a "notice" issued in 2009 the second batch Authority:China Light Industry Federation

Technical focal point: the plastic productsstandardization technical committee

Drafting Unit: Southern Plastic HoldingsLimited Huazheng Plastics Group Co., Ltd.

Instead of the standard number; GB / T8946-1998 GB / T 8947-1998

Adopt the label: no

At this point, the National StandardizationManagement Committee has officially announced the start woven drafting ofnational standards.

Prior to this, the National StandardizationManagement Committee had "notice" of 2009, the second batch ofcomments intended to project the national standards project, published in theSept. 30 ID: 585 System serial number: 80560 Project Name: plastic woven BagGeneral technical requirements "to put together for a standard twostandards.

Combined into a standard two plastic bags"and" composite plastic woven product standards, the woven industrythinks very inappropriate. Subian experts, Cangnan County Society of PlasticsIndustry, Huazheng Plastic Industry Group Co., Ltd. told the NationalStandardization Management Committee of the two national standards can notfight for a standard reason.

In the final announcement, the NationalStandardization Management Committee did not adopt the views put forward by thewoven sector. Two national standards merged as a foregone conclusion.

 Twonational standards merged as a standard for standard drafters do have a lot ofdifficulties.of national standards and revision plan:

The relevant units:

Study, the National StandardizationManagement Committee decided to issue a 2009 second batch of national standardsand revision plan (see Annex) project summary table.

Your unit organization and supervision ofthe National Standardization Technical Committee and the main drafting unit,carry out the work and implementation plan, to revise the national standardquality assurance system, the timely completion of the task of nationalstandards and revision.

Project Summary Table No. 69 as follows:

No.: 690

Project Number :20091819-T-607

Project Name: plastic woven General technicalrequirements

The standards nature: Recommended

System / amendments: Amendment

Completion Period: 2011

Convening the 2010 woven industrial chaintechnology exchanges and market matchmaking notice on supporting enterprisesfor the production of various plastic woven products and the industry chain: inorder to enhance trade exchanges, promote our woven production enterprises moreusing the new technology, new equipment, new technology raw and auxiliarymaterials and excellent performance, enhance energy saving work, enhance businesscommunication between the various sub-products producers encouraged wovenindustry, advocacy a rational competitive industry atmosphere the wovenproduction enterprises in China to improve core competitiveness, promote ofwoven industry from production expansion mode of development to enhance thequality, technical innovation and the development of ways to upgrade, promoteour woven enterprises sustainable and healthy development. The study, theplastic woven products special committee of the China Plastics ProcessingIndustry Association, is scheduled for 2010 woven industrial chain technologyexchange and market Matchmaking Symposium "held on September 14, 2010 to16 in Hebei Cangzhou Golden Lion International Hotel.

This meeting, organized by the ChinaPlastics Processing Industry Association plastic woven products, specialcommittees, and the People's Government of Cangzhou City, Cangzhou Economic andTechnological Development Zone, the contractor, Austria Stalin Grid Co., Ltd.,China Plastic Association the modified plastics special committee, the ChinaAssociation for Plastic BOPP film special committee, China Plastic Associationaluminized special committee, the preparatory group of the Chinese the blownfilm CPPIA processing technology special committee, Cangzhou City Society ofPlastics Industry, Changzhou plastics industry associations, Plastics IndustryAssociation of Wenzhou, Pingyang plastic Packaging Association, Cangnan PlasticIndustry Association, the Yanzhou City Subian Chamber of Commerce, Linyi CitySubian Association, Linyi County Subian Association the Kangping SubianAssociation, Chongqing Baoxie woven Packaging Committee and co. Yanfeng GroupCo., Ltd. the Luoxi Ya Machinery (Dongguan) Co., Ltd. sponsored.

The meeting notice of the matter are asfollows:

A main content of the meeting

1, woven industry of China DevelopmentReport 2009;

Macroeconomic situation in the second halfof 2,2010;

3, to transform and upgrade, extend wovenindustry;

4 woven industry energy saving lessonslearned and promotion;

5, plastic woven products industry TwelfthFive-Year Development Plan 'comments;

6 "plastic woven General technicalrequirements" the GB formulation and Publicizing;

7 "plastic woven the FIBC processingtrade unit consumption standards" for advice;

8, production and technical managementexperience exchange;

9, the exchange of new technologies, newprocesses, new equipment;

Polymer products business concerns reach legislation has been introduced, the European Commission has recently nominatedthe 15 chemical substances were listed chemicals reach regulation"blacklist", of which there are eight species belonging to polymerproduction commonly used chemicals.

First batch including highly concernedabout the chemicals REACH Regulation "blacklist" chemicals ofconcern, including the most commonly used over the past 60 years in a varietyof polymer products department of plasticizer DEHP, DEHP disabled indicatesthat industrial production in many commonly used substances to the brink ofelimination. Was nominated for the polymer industry influential chemicals areas follows:

Phthalate plasticizers DEHP and DBP% 26 BBPused in the production of PVC and other polymer resin, HBCDD flame retardantsused in polystyrene production, MDA for MDI manufacturing in the production ofpolyurethanes, SCCPs for rubber, paints, sealants and adhesives production offlame retardants, tributyltin oxide used in the production of antifouling paintfungicides.

The first batch of REACH"blacklist" stressed polymer producers and polymer product users mustfollow the implementation of the REACH Regulation. "Blacklist" Thisgrant will be announced before the end of January. Upon entry into force, theenterprise will prohibit the use of all products containing more than 0.1% ofthese substances. Consumers can consult these substances content informationdirectly to the supplier or retailer, manufacturers or retailers need to givereply within 45 days.